Do you own a living room that could make use of a ceiling fan to cool it down Installing a ceiling fan is as simple as switching your current light fixture. Most of the wires you need is already available so the only thing is to exchange the present workbox with one that is made for the weight of a ceiling fan. It can be very hazardous if you do not swap your current workbox to something that can take on the extra weight of the ceiling fan. Before you get started with your project, read the directions for the fan you have bought, and make sure that you have all of the needed tools.

If you are hanging the fan on a cathedral ceiling, you may require to purchase additional parts for extending the fan down lower. Whenever you have every little thing prepared, the first thing you must do is make sure that the breaker is turned off so no power goes to the light fixture. woodworking plans The moment you take out the light fixture, check to see if the current workbox can handle the extra weight. Usually they aren't made for a ceiling fan, so you will need to include additional support. This is usually done rather easily if you have entry to the attic, and are able to get to the location of the new fan.

To be able to extra support, you nail a 2x4 in the ceiling rafters where it hits the top of the workbox. Make sure that the 2x4 is secured and then bolt on the box to the wood. If everything is carried out properly, the excess weight of the fan will now be absolutely supported by the wood and the screws. In cases where you are not able to do it from the attic or you have simply no attic, you will have to add a cross bracing in your ceiling woodworking plans. Doing this is much more of a challenge and may not be as secure as using a 2x4 but it is the best you can do if you dont possess access to the attic.

Now, after assembling the fan based on the instructions, you are prepared to hang your new fan. The difficult part is linking the wiring while keeping the fan. The problem is based on the type of fan you get, whether it is a draping frame or a fan that has a bracket with a J hook. For most fans the wall switch will turn the device on or off, as the chain will control the speeds. If you want a light kit with your fan, they can be controlled by either chain or wall switch.

Next, just follow the wiring directions, usually as fundamental as connecting the two black wires, the two white wires, and the two ground wires woodworking plans. Now all you will need to do is accomplish assembling the fan according to the directions, by connecting the fan blades. As soon as that is completed, turn the breaker back on to find out the results.